|
Embedded Computing |
|
Data Recording & Storage |
|
Protocol & Bus Analyzers |
The ADC-MOD2 is a front panel mezzanine module designed to provide analog I/O functionality to VMETRO's Virtex-II Pro and Virtex-5 FPGA-based processing PMC modules. This module provides two channels of 125 MHz, 14-bit analog to digital conversion. The ADC-MOD2 is aimed at embedded application development.
The ADC-MOD2 is designed to be used with:
| - PMC-FPGA05 | A Virtex-5 LX110 FPGA based PMC |
| - DEV-FPGA05 |
A Virtex-5 LX110 FPGA based PCI board |
| - PMC-FPGA03 |
A Virtex II Pro XC2VP50 FPGA based PMC |
Analog Inputs
The dual channel 125 MHz 14-bit ADC-MOD2 has an onboard 125 MHz oscillator as well as provision for external clock sources. The sampling clock and trigger are made available to the host FPGA for complete application control. General purpose digital I/O signals are routed through to the front panel. These are also controlled by the host FPGA. These can be used for synchronizing multiple boards or providing alternative trigger mechanisms. Ideal applications in Software Defined Radio (SDR), radar and telecommunications.
Software
The ADC-MOD2 is hosted by the PMC-FPGA03, PMC-FPGA05 or DEV-FPGA05 which are supported under Windows XP, VxWorks and Linux (Contact VMETRO for availability). The ADC-MOD2 support package is additional to the BSP that accompanies VMETRO PMC modules and includes:
Development of VHDL code for the FPGA requires synthesis tools such as Xilinx Foundation.
** The ADC-MOD2 replaces the ADC-MOD1.